Quick Start for MobiusPi Python Development

The InGateway series of Beijing InHand Networks Technology Co., Ltd. (InHand) consists of InGateway902 (referred to as IG902 hereinafter) and InGateway501 (referred to as IG501 hereinafter).
MobiusPi is a secondary development platform for the InGateway series. This document describes how to perform Python-based secondary development on MobiusPi.

1. Build a MobiusPi development environment

Before starting development, ensure that you get the following items ready:

  • InGateway
    • InGateway501
      • Firmware version: V2.0.0.r12351 or later
      • SDK version: py2sdk-V1.3.4 or later
      • The network is connected and the debugging mode is enabled.
    • InGateway902
      • Firmware version: V2.0.0.r12537 or later
      • SDK version: py3sdk-V1.3.5 or later
      • The network is connected and the debugging mode is enabled.
  • PC
    • Python 2.7.X/3.7.X interpreter
    • Visual Studio Code software
      • Python plug-in
      • Project Templates plug-in
      • SFTP plug-in
    • OpenSSH

If your MobiusPi and PC have met all the above items, skip this section. Otherwise, prepare a development environment as follows.

1.1 Prepare the hardware and network environment

1.1.1 Connect the power supply and use a network cable to connect the platform to the PC

  • Prepare the IG501 hardware

    Power on IG501 and connect the PC and IG501 through an Ethernet cable according to the topology.

    images/2020-02-20-09-23-14.png

  • Prepare the IG902 hardware

    Power on IG902 and connect the PC and IG902 through an Ethernet cable according to the topology.

    images/2020-02-20-16-11-49.png

1.1.2 Configure the LAN parameters

1.1.3 Configure the WAN parameters

1.1.4 Update the software version

If you want to get the latest MobiusPi and its functional characteristics, contact Customer Services. To update the software version, see the following links:

1.1.5 Enable the debugging mode for MobiusPi

To run and debug Python code on MobiusPi during development, you need to enable the debugging mode for MobiusPi.

1.2 Install required software on the PC

1.2.1 Install the Python interpreter

The PC shall be installed with the Python2.7.X or 3.7.X interpreter (the 3.7.X interpreter is recommended). You can download the install package from https://www.python.org/downloads/ and install it to the PC.

_images/2019-11-08-16-03-16.png

1.2.2 Install Visual Studio Code

You can download Visual Studio Code (VS Code) from https://code.visualstudio.com/Download.

_images/2019-11-29-15-28-59.png

After VS Code is downloaded and installed, run the software, and its page is as follows.

_images/2020-01-02-10-17-13.png

1.2.3 Install OpenSSH

You can enter the ssh command in Command Prompt to check whether the PC supports the SSH protocol. If the PC supports the SSH protocol, the following figure is displayed:

images/2020-05-09-15-17-26.png

If the PC does not support the SSH protocol, download OpenSSH from https://www.openssh.com and install it to the PC.

1.3 Prepare the VS Code development environment

1.3.1 Install the VS Code extension

To develop and debug the Python code on MobiusPi, you must install the following extensions in Extensions of VS Code IDE:

  • Python is a VS Code Python extension. It provides rich features, including IntelliSense, Linting, debugging, code navigation and formatting, support to Jupyter notebook, restructuring, variable resource manager, test resource manager, and code snippets. For more information, see its official website.

  • Project Templates is a VS Code extension that allows you to quickly create new projects based on a custom template. InHand will release multiple Python App templates. You can use Project Templates to import a template and initialize your project quickly.

  • SFTP allows you to use the SFTP Sync plug-in to upload the code to MobiusPi.

    _images/2020-01-02-10-19-57.png

    _images/2020-01-02-10-22-26.png

    _images/2020-01-02-10-24-12.png

Now, all plug-ins required by MobiusPi have been installed. For more information about VS Code plug-ins, see the Visual Studio Code official website.

1.3.2 Configure the Python interpreter version

Press Ctrl+Shift+P. On the displayed Command Palette, enter >Python: select Interpreter.

_images/2020-01-02-10-25-16.png

Select a required Python interpreter. In this document, the Python 3.7.X interpreter is used. The selected 3.7.X version shall be consistent with that on the Edge Computing > Python Edge Computing page. Then, the selected Python interpreter version is displayed in the lower-left corner of VS Code.

_images/2020-01-02-10-26-30.png

1.3.3 Configure the project template

1.3.3.1 Apply the InHand standard project template
  • Step 1: Click Here to download a MobiusPi project template.

    MobiusPi provides multiple project templates for you to quickly initialize your project directory. For more information about each project template, see README.md. In this document, the standard project template helloworld-template is used as an example.

    _images/2020-01-16-14-18-53.png

  • Step 2: Open the project template.

    Decompress the downloaded project template package, use VS Code to open the helloworld-template folder in the decompressed package, choose Files > Open Folder, and select the decompressed helloworld-template folder.

    _images/2020-01-02-10-30-55.png

    The following figure shows the opened project template folder helloworld-template. The project template contains the following information:

    ├── .vscode
    │  └── sftp.json
    ├── build
    ├── lib
    ├── src
    │  │── main.py
    │  └── parse_config.py
    ├── config.yaml
    └── setup.py
    
    • .vscode: The VS Code configuration folder.
      • sftp.json: The configuration file of the SFTP plug-in, which is used to connect to MobiusPi over SFTP.
    • build: The App release package folder.
    • lib: The folder of the App third-party dependency library.
    • src: The App source code folder.
      • main.py: The App entry.
      • parse_config.py: The App parsing configuration file.
    • config.yaml: The App configuration file.
    • setup.py: The App version, SDK version, and other information.

    _images/2020-01-02-13-12-52.png

  • Step 3: In the Command Palette, enter the >Project:Save Project as Template command to save the current project file as a template.

    _images/2020-01-02-13-14-08.png

    Enter a name for your template, such as helloworld-template.

    _images/2020-01-02-13-14-51.png

1.3.3.2 Custom project template
  • Step 1: Create a project template folder which must contain the following information. You can add other files as needed.

    ├── .vscode
    │  └── sftp.json
    ├── build
    ├── src
    │  └── main.py
    └── setup.py
    
    • .vscode: The VS Code configuration file. You can enter the >SFTP:Config command in the VS Code Command Palette to quickly create the .vscode folder and the sftp.json file.
      • sftp.json: The configuration file of the SFTP plug-in, which is used to connect to MobiusPi over SFTP.
    • build: The App release package folder.
    • src: The App source code folder.
      • main.py: The App entry.
    • setup.py: The App version, SDK version, and other information. We recommend that you define the information according to the standard template.
  • Step 2: Use VS Code to open the custom project template folder, choose Files > Open Folder, and select the custom project template folder.

  • Step 3: In the Command Palette, enter the >Project:Save Project as Template command to save the current project file as a template.

2. Compile the first MobiusPi App: Hello World

This document takes the HelloWorld App as an example to describe how to develop MobiusPi Python Apps in VS Code. This App can print a “hello world!” log every 10s in MobiusPi and allows you to import the configuration file and modify the log.

2.1 Use a template to create a project

  • Step 1: Use VS Code to open the project folder of the Python App. The following figure is displayed:

    _images/2020-01-02-10-36-39.png

  • Step 2: In the Command Palette, enter the >Project:Create Project From Template command to quickly create a project directory based on the existing template.

    _images/2020-01-02-10-37-10.png

  • Step 3: Enter the name of the helloworld-template, and press Enter.

    _images/2020-01-02-10-39-40.png

    After the template is selected, VS Code automatically adds the file that you add in the template to the folder of the current project.

    _images/2020-01-02-10-42-36.png

2.2 Encoding

The standard project template helloworld-template can print a “hello world!” log every 10s in MobiusPi and allows you to import the configuration file and modify the log. To modify the App name, modify the code in main.py and setup.py by referring to the following figure. Note: The Python App name cannot contain any space.

images/2020-05-26-09-41-56.png

images/2020-05-26-09-46-00.png

2.3 Debugging

2.3.1 Create an SFTP connection

To debug the code remotely, upload the local code to the remote server (MobiusPi). Before uploading the local code, ensure that the debugging mode has been enabled for MobiusPi. After the debugging mode is enabled, the following figure is displayed:

images/2020-05-26-09-53-30.png

  • Step 1: Open the sftp.json file.

    In the Command Palette, enter the >SFTP:Config command and then open the sftp.json file.

    _images/2020-01-02-16-25-48.png

  • Step 2: Configure the SFTP connection.

    • Configure the SFTP connection for IG501

      In the sftp.json file, configure the SFTP connection according to the connection parameters on the Edge Computing > Python Edge Computing page. Note: The Python App name must be same to that in mian.py.

      images/2020-05-26-10-27-30.png

    • Configure the SFTP connection for IG902

      In the sftp.json file, configure the SFTP connection according to the connection parameters on the Edge Computing > Python Edge Computing page. Note: The Python App name must be same to that in mian.py.

      images/2020-05-26-10-33-11.png

  • Step 3: After the configuration is completed and saved, enter the >SFTP:Open SSH in Terminal command in the Command Palette to connect to the remote server.

    _images/2020-01-02-18-14-52.png

  • Step 4: In the Command Palette, you are requested to select the SFTP server to be connected. Select the SFTP server in sftp.json and press Enter.

    images/2020-04-21-19-25-33.png

  • Step 5: If this is the first time you connect to the server, the TERMINAL window prompts you to confirm whether you want to connect to the server. Enter Yes and press Enter. Then, enter the >SFTP:Open SSH in Terminal command and the IP address of the SFTP server in the Command Palette again.

    _images/2019-12-05-16-56-59.png

  • Step 6: The TERMINAL window prompts you to enter the password. You only need to copy the password in the sftp.json file, and paste it to the required place.

    _images/2020-01-02-18-23-14.png

    After an SFTP connection with MobiusPi is created, the page is shown as follows:

    _images/2020-01-02-18-23-49.png

2.3.2 Debug the code

  • Step 1: Synchronize the code.

    After the SFTP connection is created, right-click the blank area on the left, and choose Sync Local > Remote to synchronize the code to the remote server. Later, if you modify or delete code on the local PC, the code changes will be automatically synchronized to the remote server.

    _images/2020-01-02-18-24-27.png

    You can check whether the remote server has received the App code in the TERMINAL window. In the TERMINAL window, enter the following command to view uploaded App folder information:

    cd app  
    ls -l
    

    _images/2020-01-02-18-25-11.png

  • Step 2: Debug the script in the TERMINAL window.

    After the code is synchronized, in the TERMINAL window, enter the following command to execute the script on IG501 immediately. After the script is executed, you can view the execution result in the TERMINAL window: the log “hello world!” is printed.

    python -m ptvsd --host 192.168.1.1 --port 3000 HelloWorld/src/main.py 
    
    • 192.168.1.1 is the IP address of the host configured in sftp.json.
    • 3000 is the recommended debugging port number.
    • HelloWorld/src/main.py is the execution path of mian.py, which can be adjusted as needed.

    MobiusPi’s Python development environment provides the ptvsd dependency library for remote code debugging. For more information about the ptvsd plug-in, see ptvsd user manual.

    _images/2020-01-02-18-27-40.png

  • Step 3: After debugging, press Ctrl + C on the terminal to terminate the debugging process.

    images/2020-05-26-10-58-49.png

2.4 Build an App release package

After debugging, you can build an App release package to quickly deploy the App to other MobiusPi devices.

  • Step 1: Build an App release package.

    In the TERMINAL window, run the build_py_app.sh HelloWorld command to build an App release package. (That is, the build_py_app.sh Python App name.)

    images/2020-05-26-11-02-37.png

  • Step 2: Download the App release package.

    After the command is executed, the App release package is automatically generated in the build directory on the remote server. Right-click the build folder and select Download Folder to download the built App release package to the local PC for subsequent deployment.

    _images/2020-01-02-18-32-25.png

    After the package is downloaded, you can view the HelloWorld App release package in the build directory.

    _images/2020-01-02-18-32-54.png

2.5 Deploy the App on the MobiusPi web page

Run the main.py script. Or, after the App release package is built, the App is automatically generated on the connected MobiusPi, but this App cannot be started. Refer to the following links to deploy the App to MobiusPi:

2.6 View the App running status

You can view the App running status on the Edge Computing > Python Edge Computing page in MobiusPi.

images/2020-02-15-16-54-40.png

Click View Logs to view the App running logs.

images/2020-02-15-16-56-39.png

_images/2019-12-05-14-54-03.png

2.7 Update the App configuration file

  • Step 1: Modify the configuration file.

    In the config.yaml file of the App, modify description: "hello world!" to description: "hello inhand!".

    _images/2019-12-05-14-54-34.png

  • Step 2: Import the configuration file and restart the App.

    On the Edge Computing > Python Edge Computing page in MobiusPi, import the modified configuration file of the HelloWorld App, and restart the App.

    images/2020-02-15-16-58-05.png

After restart, the HelloWorld App runs with the updated configuration file and prints a log “hello inhand!” every 10s.

_images/2019-12-06-15-20-04.png

2.8 Annex

2.8.1 Install a third-party dependency library for the specified App

To install a third-party dependency library for the specified App, you need to enable the debugging mode for MobiusPi and connect to the Internet. The following takes installing the xlrd dependency library to the HelloWorld App as an example to describe how to install a third-party dependency library to a specified App.

images/2020-02-15-16-37-48.png

images/2020-02-14-10-21-15.png

  • Step 1: Use VS Code to connect to MobiusPi over SFTP. For more information, see Create an SFTP connection.

    _images/2020-01-03-11-07-08.png

  • Step 2: Run pip install + dependency library name + ==version number + -t + App’s lib folder path and press Enter to install the dependency library to the specified App. (If the version number is not added, after the pip command is run, the latest dependency library is automatically installed.)

    pip install xlrd==1.2.0 -t /var/user/app/HelloWorld/lib/
    

    images/2020-05-26-11-09-15.png

  • Step 3: Then, the dependency library is automatically downloaded and installed. After the library is installed, the following figure is displayed:

    images/2020-05-26-11-11-54.png

  • Step 4: Run the export command to set an environment variable for the App. In the TERMINAL window, run the following command (replace HelloWorld with the actual App name).

    export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/var/user/app/HelloWorld/lib/  
    export PYTHONPATH=$PYTHONPATH:/var/user/app/HelloWorld/lib/
    

    images/2020-05-26-11-16-41.png

    After the third-party dependency library is installed for the specified App, you must configure a corresponding environment variable before debugging this App; otherwise, this App cannot run during debugging. When multiple third-party dependency libraries are installed, you just need to add the environment variable once. After an SFTP connection is created again, you need to configure the environment variable again. When the App is started in MobiusPi, the environment variable of the third-party dependency library is automatically added to the App’s lib folder.

  • Step 5: Run the code to check whether the App runs normally.

    _images/2020-01-03-11-39-45.png

2.8.2 Install the third-party dependency library to SDK

To install a third-party dependency library to SDK, you need to enable the debugging mode for MobiusPi and connect to the Internet. The following takes installing the xlrd dependency library to SDK as an example to describe how to install a third-party dependency library to SDK.

images/2020-02-15-16-37-48.png

images/2020-02-14-10-21-15.png

  • Step 1: Use VS Code to connect to MobiusPi over SFTP. For more information, see Create an SFTP connection.

    _images/2019-12-06-16-41-02.png

  • Step 2: Run pip install + dependency library name + ==version number + --user and press Enter to install the dependency library to SDK. (If the version number is not added, after the pip command is run, the latest dependency library is automatically installed.)

    pip install xlrd==1.2.0 --user
    

    images/2020-05-12-09-50-16.png

  • Step 3: Then, the dependency library is automatically downloaded and installed. After the library is installed, the following figure is displayed:

    images/2020-05-12-09-51-17.png

  • Step 4: Run the code to check whether the App runs normally.

    images/2020-05-12-09-52-36.png

Note: After the third-party dependency library is installed in this way, if the App release package is imported to another MobiusPi project on which the third-party dependency library required for running this App is not installed to SDK, this App may cannot run.

2.8.3 Enable automatic code completion

To improve the encoding efficiency, you can implement automatic code completion by using Python extensions.

  • Step 1: Choose Files > Preferences > Settings to enter the Settings page.

    _images/2020-01-03-14-06-54.png

  • Step 2: On the Settings page, choose Extensions > Python, locate Auto Complete: Extra Paths, and then click Edit in setting.json.

    _images/2020-01-03-14-08-11.png

    Add the following configuration items to settings.json and save the configuration (python.pythonPath is the installation path of the Python interpreter).

    "python.linting.pylintEnabled":false,
    "python.linting.flake8Enabled":true,
    "python.jediEnabled":true,
    "terminal.integrated.rendererType":"dom",
    "explorer.confirmDelete":false,
    "python.pythonPath":"C:/Users/zn/AppData/Local/Programs/Python/Python37",
    

    _images/2020-01-03-14-10-41.png

FAQ

  • Q1: During SFTP connection building, it prompts “REMOTE HOST IDENTIFICATION HAS CHANGED and Host key verification failed”. What should I do?

    images/2020-05-26-11-30-03.png

    A1: The reason is that the MobiusPi key has been updated but the PC key does not, resulting in authentication failure. To solve the problem, just delete the row with key conflict from the key file. Press Ctrl and click the conflicting item to quickly access the link.

    images/2020-05-26-11-36-29.png

    After deletion, run the >SFTP:Open SSH in Terminal command. Then, an SFTP connection is created.

    _images/2020-01-03-14-34-03.png

  • Q2: After the SFTP connection is created, right-click on a blank area and choose Sync Local > Remote to synchronize the code to the remote server. It prompts “All configured authentication methods failed”. What should I do?

    _images/2020-01-03-14-36-41.png

    A2: Ensure that the password in the sftp.json file is same to that on MobiusPi. After the passwords are the same, synchronize the code again.

  • Q3: How to call the serial port and network port of IG902 during development?

    A3: The RS485 serial port name is /dev/ttyO3 and the RS232 serial port name is /dev/ttyO1. The serial port and network port can be called with the standard Python serial port/network port usage. For example, use the pyserial library to call the serial port.

  • Q4: When creating an SFTP connection with MobiusPi, it prompts “SSH error”, as shown in the following figure. What should I do?

    images/2020-04-21-20-11-13.png

    A4: Install OpenSSH to support the SSH protocol. Download OpenSSH from https://www.openssh.com.